fbpx

Special convectors

The range of devices

  • FCFN
  • FCFP

Special convector FCFN

Special convector Fancoil

General information

Maximum coolant temperature: + 90°C.
Copper-aluminum heat exchanger – 1 pc. (1/2″, 100×400 mm or 3/4″, 120×60 mm).
Test pressure 1.6 MPa; operating pressure of 1.0 MPa; noise level 24-28 dB.
Dimensions: width b = 135 mm; height h = 245 mm; length l = 750-3000 mm (at the request of the customer it is possible to manufacture a convector of non-standard length in steps of 250 mm).

MINIMUM THERMAL POWER

Special convector FCFP

Special convector Fancoil

General information

Maximum coolant temperature: + 90°C.
Copper-aluminum heat exchanger – 1 pc. (1/2″, 100×400 mm or 3/4″, 120×60 mm).
Test pressure 1.6 MPa; operating pressure of 1.0 MPa; noise level 24-28 dB.
Dimensions: width b = 290 mm; height h = 110 mm; length l = 1000-3000 mm (at the request of the customer it is possible to manufacture a convector of non-standard length in steps of 250 mm).

MINIMUM THERMAL POWER

Special convectors

The Ukrainian company Fancoil always cares about its customers. Therefore, in addition to the standard of our products, we have provided many variants of unusual orders that you may need.

Dimensions
It often happens when our client does not fit the conventional dimensions of the convector (width b – 230-380 mm, depth h – 65-390 mm, length l – 1000-3000 mm). In this case, our specialists go to your facility, make measurements and then make the convector of the sizes you need.

Heat exchangers and tangential fans
By our standards, the convectors are equipped with 1 copper-aluminum heat exchanger and 1 fan per meter running in convectors with forced convection. But there may be more.

Form
Our clients are often asked to make custom-built indoor floor convectors. So, for example, we make them angular, joyful, and Z- and U-shaped.

Use of supply air
Fansoil™ also produces convectors using supply air. This convector has an outlet through which air enters the tangential fan. With this fan you can use the fresh air from the outside, and the built-in cleaning filter will make it clean.

Type of fan
In the Fancoil™ convector characteristics, you will see that they have tangential fans installed. But there is another type that we use, radial. They collect air from the heat exchanger, forcing it upwards, while tangential ones – simply collecting cold air from the floor and supplying it to the heat exchanger.

If you need to make the right decision when choosing a manufacturer, you should pay attention to Fancoil ™ products, as our experts will help you choose the heating system according to your requirements and needs.

Copyrigt ©2015 Fancoil

Call Now Button