fbpx

Wall convectors

The range of devices

  • FCR
  • FCFR
  • FCFDR

Wall convector with natural convection FCR

Wall convector (radiator) Fancoil

General information

Height – 500 mm (any size is possible).
Maximum coolant temperature + 90°C, test pressure 1.6 MPa.
Quantity of copper-aluminium heat exchangers: from 2 to 4 pc. (1/2″, 100х40 mm or 3/4″, 120х60 mm).
Length: 1000-3000 mm (at the request of the customer it is possible to manufacture a convector of non-standard length in 50 mm increments).

CONVECTOR MODELS FCR

Wall convector (radiator) Fancoil

Wall convector (radiator) Fancoil

Wall convector (radiator) Fancoil

Wall convector (radiator) Fancoil

MINIMUM THERMAL POWER

Wall convector with forced convection FCFR

Wall convector (radiator) Fancoil

General information

Height is 500 mm (any size is possible).
Maximum coolant temperature + 90°C, test pressure 1.6 MPa.
Quantity of copper-aluminium heat exchangers: from 2 to 4 pc. (1/2 «, 100х40 mm or 3/4», 120х60 mm).
Length: 1000-3000 mm (at the request of the customer it is possible to manufacture a convector of non-standard length in 50 mm increments).

Convector models FCFR

Wall convector (radiator) with fan Fancoil

Wall convector (radiator) with fan Fancoil

Wall convector (radiator) with fan Fancoil

Wall convector (radiator) with fan Fancoil

MINIMUM THERMAL POWER

Design radiator with forced convection FCFDR

Design radiator with forced convection FCFDR

General information

Height is 500 mm (any size is possible).
Maximum coolant temperature + 90°C, test pressure 1.6 MPa.
Quantity of heat exchangers: 2 pc. (1/2″, 100х40 mm or 3/4″, 120х60 mm).
Length: 1000-3000 mm (at the request of the customer it is possible to manufacture a convector of non-standard length in 50 mm increments).

Convector models FCFDR

Design radiator with forced convection FCFDR

Design radiator with forced convection FCFDR

Minimum thermal power

Wall convector

Wall convectors have many names. They are also called decorative or copper-aluminum radiators. If for some reason floor products are not suitable for you, then the wall option is for you. In addition, Fancoil™ radiators differ from other types of convectors only in shape and method of location. Copper-aluminum radiators far exceed their predecessors – cast iron, steel and aluminum radiators.

First, they are more efficient and economical. In particular, this applies to forced convection radiators, when the appliance itself adjusts to the room temperature you set, an intelligent radiator. This eliminates under- and overheating, significantly saving energy (gas, firewood, electricity) and therefore your finances.

Secondly, the small capacity of water in the coolant is a rapid heat recovery, which 9 times faster provides the required room temperature due to the high thermal conductivity of the heat exchanger components (copper and aluminum).

Third, wall-mounted convectors with a Fancoil™ copper-aluminum heat exchanger, unlike cast iron, steel and aluminum radiators, can evenly heat your room with a tangential fan. They, using the physical laws of indoor air circulation, collect the cold masses from below and give off already heated air that rises up.

It’s also worth remembering that all Fancoil™ products are safe to use. The materials of which the components of the convector are made, are environmentally friendly and harmless to health. And thanks to the special technology that copper-aluminum radiators are designed for, you will never get burned, as the surface does not heat more than 43°C.

In addition to an efficient heating appliance, you can also choose its appearance, as Fancoil departs from the tradition of white batteries. You can choose a metal or wooden case of different colors and shades, so that the wall convector fits perfectly into your interior and will emphasize your successful choice of heating equipment.

Copyrigt ©2015 Fancoil

Call Now Button